INSTALLATION
The NST-10E model Ball Float Air Eliminators must always be installed with the inlet at the bottom so that the float mechanism wil rise and fall vertically. From the tapping provided at the low point of the body 3/8’’ balance pipe having a continuous rise towards the eliminator must be fitted and connected into the inlet pipework as shown in sketch.
| SPARE PARTS | ||
| No | Description | Material |
| 1 | BONNET |
CI ASTM A48 CLASS 30 |
| 2 | BODY |
CI ASTM A48 CLASS 30 |
| 3 | FLOAT SEAT | STAINLESS STEEL 304 |
| 4 | SUPPORT FRAME | STAINLESS STEEL 304 |
| 5 | VALVE SEAT | STAINLESS STEEL 410 |
| 6 | PIVOT PIN | STAINLESS STEEL 304 |
| 7 | SET BOLTS | STAINLESS STEEL 304 |
| 8 | FLOAT WITH LEVER | STAINLESS STEEL 304 |
| 9 | FLOAT CLIP | STAINLESS STEEL 304 |
| 10 | FLOAT VALVE | SAE Gr. 5 |
| 11 | BONNET GASKET | STAINLESS STEEL 304+ GRAPHITE |
| 12 | VALVE SEAT GASKET | STAINLESS STEEL 304 |
| DIMENSIONS | ||
| Size | L | H |
| 1/2 ″ | 128 mm | 140 mm |
| 3/4 ″ | 128 mm | 140 mm |
| CONNECTION | |
| Size | 1/2'' - 3/4'' |
| Weights (KG) | 5,0 |
| OPERATING CONDITIONS | |
| Max. Allowable Pressure PMA (bar) | 24 |
| Max. Allowable Temperature TMA (ºC) | 250 |
| Max. Operating Pressure PMO (bar) | 16 |
| Max. Differential Pressure PMD (bar) | 6 |
NST-10E